Canon Netspot Device Installer For Mac

Return to site

Canon Netspot Device Installer For Mac

Select the device.
2.
Select [Protocol Settings] from the [Device] menu.
3.
Select the method for setting the IP address.
[Manual Setting] 
Allows you to set the IP address directly. The IP address entered in [IP Address] is set for the printer.
[Auto Detect] 
Obtains an IP address using RARP, BOOTP, or DHCP.
[RARP]
Obtains an IP address using RARP. 
(The RARP daemon needs to be running.)
[BOOTP]
Obtains an IP address using BOOTP. 
(The BOOTP daemon needs to be running.)
[DHCP]
Obtains an IP address using DHCP. 
(The DHCP server needs to be running.)
Enter the IP address of the printer.
Enter the subnet mask as needed.
Enter the gateway address as needed.
 When selecting [RARP] You cannot enter any values in [IP Address].
 When selecting [BOOTP] or [DHCP] You cannot enter any values in [IP Address], [Subnet Mask], and [Gateway Address].
 If you cannot use RARP, BOOTP, or DHCP 
4.
When the message  appears, click [OK].
Wait for approximately 20 seconds or longer as is after clicking [OK].
After completing the reset, the settings are enabled.

Canon netspot device installer for mac os

Netspot App FreeNetSpot Device Installer is a utility software that enables the configuration of network protocol settings on Canon devices connected to a network. NetSpot Device Installer v3.2.1(r3202) for Mac Description NetSpot Device Installer is utility software that allows you to make network protocol settings for Canon devices connected to your network. NetSpot Device Installer v3.13(r3139) for Macintosh Description NetSpot Device Installer is utility software that allows you to make network protocol settings for Canon devices connected to. ImageCLASS MF4350d MF4350d Setup Instructions Canon Drivers RJ-11 Fax Cord Registration Card Cartridge 104 Starter Manuals NetSpot Device Installer Power Cord Warranty Card Canon imageCLASS MF4300 Series LIMITED WARRANTY.